RIGOL
2-8 © Copyright RIGOL Technologies, Inc. 2007.
User’s Guide for DS1000 Series
4. Volts/Div settings
The Volts/Div control has Coarse or Fine configuration. The Vertical Sensitivity is
2mv-5V/div.
Coarse: It is the default setting of Volts/Div, and it makes the vertical scaling in a
1-2-5-step sequence from 2mV/div, 5mV/div, 10mV, to 5 V/div.
Fine: This setting changes the vertical scale to small steps between the coarse
settings. It will be helpful when you need to adjust the waveform’s vertical
size in smooth steps
Figure 2-9
Coarse/Fine Shortcut key:
To change Coarse/Fine setting, not only by menu but also by pressin
To Next Page
Loading...
