RIGOL
© Copyright RIGOL Technologies, Inc. 2007. III
User’s Guide for DS1000 Series
Use Proper Fuse. Use only the fuse type and rating specified for this product.
Avoid Circuit or Wire Exposure. Do not touch exposed connections and
components when power is on.
Do not operate with suspected failures. If you suspect damage with this
product, have it inspected by qualified service personnel before further operations.
Provide Proper Ventilation. Refer to the manual’s installation instructions for
details as to the oscilloscope has proper ventilation.
UL/cUL or cCSAus certified probes must be used with the oscilloscope.
Do not operate in wet/damp conditions
Do not operate in an explosive atmosphere
Keep product surfaces clean and dry
To Next Page
Loading...
