RIGOL
DS6000 User’s Guide
Press ClockEdge to select the desired clock edge.
: trigger on the rising edge of the data pattern when the voltage level meets
the preset Trigger Level.
: trigger on the falling edge of the data pattern when the voltage level meets
the preset Trigger Level.
Trigger Mode:
Press Sweep to select the Trigger Mode (page 5-3) under this trigger type as auto,
normal or single. The corresponding status light of the current trigger mode turns on.
Trigger Setting:
Press Set Up to set the trigger parameter (trigger holdoff) under this trigger type.
Trigger Level:
Use TRIGGER LEVEL to modify the level. For details, please refer to the
description of “Trigger Level” on page 5-9.
To Next Page
Loading...
