Rigol DS6062-DEMO - Quick Measurement after Auto

RIGOL
DS6000 User’s Guide
6-14
Quick Measurement after Auto
When the oscilloscope is correctly connected and has detected input signal, press
Auto to display the waveform automatically and open the following function menu:
Single-period: measure the “Period” and “Frequency “of the
current signal within a single period and display the measurement
results at the bottom of the screen.
Multi-period: measure the “Period” and “Frequency “of the
current signal within multiple periods and display the
measurement results at the bottom of the screen.
Rise Time: measure the “Rise Time” of the current signal and
display the measurement result at the bottom of the screen.
Fall Time: measure the “Fall Time” of the current signal and
display the measurement result at the bottom of the screen.