Rigol RSA3000E Series User Manual

Chapter 4 Functions of the Front Panel of EMI RIGOL
RSA3000E User Guide 4-43
Shortcut Key
Auto Tune
In EMI mode, the Auto Tune function is disabled.
Preset
Recalls the preset setting and restores the system settings of the analyzer to a
specified status.
Remarks:
 To set the preset type, press System  Reset  Preset Type. The available
types include "Factory" or any one of items from "User1" to "User6".
 Press Preset to recall the factory settings listed in the following table (except
items specified in Note [1]) or user-defined settings.
Parameter Name
EMI Parameter Value
FREQ
Frequency(Meter)
515 MHz
Midspan Freq
515 MHz
Start Freq
Auto, 30 MHz
Stop Freq
Auto, 1 GHz
Scale Type
Log
SPAN
Span
970 MHz
AMPT
Ref Level
106.99 dBuV
Att(Meter)
10 dB
RF Preamp(Meter)
Off
Y Axis Unit
dBuV
Scale/Div
10 dB
Ref Offset
0 dB
BW
RBW(Meter)
Auto, 120 kHz
Filter Type(Meter)
EMI
Trigger
Source
Free Run
Hold-off
OFF, 100 ms
Auto Trig
OFF, 100 ms
Slope
POS
Delay
OFF, 1 μs

Rigol RSA3000E Series Specifications

General

Brand	Rigol
Model	RSA3000E Series
Category	Measuring Instruments
Language	English