Rigol RSA3000E Series - User Interface; GPSA Mode User Interface

RIGOL Chapter 1 Quick Start
1-18 RSA3000E User Guide
13. IF OUT
Indicates the intermediate frequency signal in the output RF component. Its
center frequency is 430 MHz.
User Interface
GPSA Mode User Interface
The user interface of GPSA mode is shown in the following figure.
Figure 1-9 User Interface (GPSA Mode)
Table 1-4 User Interface Icons
No.
Name
Description
1
Reference level
Displays the reference level value.
2
Measurement result
Displays the current measurement results for the
marker (when no marker exists, the measurement
results display frequency/span value).
3
RIGOL
Indicates the company logo.
4
System status
Rmt: indicates remote operation.
Ext: indicates the external reference.
Uncal: indicates that the measurement has not be
3 4 5 6 7 8 9 10 11 12
13 14
2
1
24 23 22 21 20 19 18 17 16 15