Rigol RSA3000E Series - Shortcut Key; Auto Tune; Preset

Chapter 3 Functions of the Front Panel of RTSA RIGOL
RSA3000E User Guide 3-35
Shortcut Key
Auto Tune
In RTSA mode, the Auto Tune function is disabled.
Preset
Recalls the preset setting and restores the system settings of the analyzer to a
specified status.
Remarks:
 To set the preset type, press System  Preset  Preset Type to select
"Default" or any one of the items from "User1" to "User6".
 Press Preset to recall the specified factory settings (as shown in the following
table, except the items specified in Note[3]) or user settings.
Parameter Name
RTSA Parameter Value
Non-PvT
PvT
FREQ
Center Freq
1.5 GHz
Start Freq
1.495 GHz
Stop Freq
1.505 GHz
CF Step
Auto, 1 MHz
Freq Offset
0 Hz
SPAN
Span(Acq BW)
10 MHz
Ref Value
--
0 us
Scale/Div
--
3.1946 ms
Ref Position
--
Left
Auto Scale
--
Auto
AMPT
Ref Level
0 dBm
Attenuation
Auto, 10 dB
RF Preamp
Off
Y Axis Unit
dBm
Scale/Div
10 dB
Max Mixer Lvl
-10 dBm
Ref Offset
0 dB
BW
RBW
Auto, 50.228 kHz (RBW2)
--
Filter Type
Kaiser
--