Rigol RSA3000E Series User Manual

RIGOL Chapter 5 Functions of the Front Panel of VSA
5-42 RSA3000E User Guide
Marker Func
Band Function
The band function defines the corresponding parameters for a frequency band
measurement signal at the marker point.
1. Band Power
Calculates the total power within a certain band.
2. Off
Disables the band function. Disabling the band function will neither affect the
frequency band parameters nor disable the marker.
Band Adjust
Adjusts the bandwidth parameter for the band function.
1. Band Span
Sets the bandwidth of the signal involved in the calculation for the band
function.
2. Band Left
Sets the left edge frequency of the signal involved in the calculation for the band
function.
3. Band Right
Sets the right edge frequency of the signal involved in the calculation for the
band function.
Note: The above menus are valid for the frequency domain data.

Rigol RSA3000E Series Specifications

General

Brand	Rigol
Model	RSA3000E Series
Category	Measuring Instruments
Language	English