Chapter 5 Functions of the Front Panel of VSA RIGOL
RSA3000E User Guide 5-41
Mkr->Ref
Sets the reference value in the trace window where the current marker resides to the
amplitude at the current marker.
If Position marker is selected, the reference value will be set to the amplitude at
the current marker.
Given a Delta marker, if the current marker is the reference marker, then the
reference value is set to the amplitude at the reference marker; if the current
marker is the Delta marker, then the reference value is set to the amplitude at
the Delta marker.
MkrΔ->CF
Sets the center frequency of the analyzer to the center frequency point of the
frequency at delta marker and its reference marker.
This function is only valid when the Delta marker is selected.
To Next Page
Loading...
