Rigol RSA3000E Series User Manual

Chapter 5 Functions of the Front Panel of VSA RIGOL
RSA3000E User Guide 5-33
<ModulationOrder>.
Spaces, tabs and line
breaks are ignored.
sequences, i.e.
<Data>-elements, can be
defined in total.
</RIGOL_VSA_KNOWN_
DATA_FILE>
--
File end
Note
[1]
: The exact number depends on available memory space.
The sample XML file for BER test is as follows.
<RIGOL_VSA_KNOWN_DATA_FILE Version="01.00">
<Comment> Standard 8PSK </Comment>
<Base> 16 </Base>
<ModulationOrder> 8 </ModulationOrder>
<ResultLength> 148 </ResultLength>
<Data> 777 511 727 242 206 341 366 632 073 607
770 173 705 631 011 235 507 476 330 522
177 177 171 117 777 177 717 717 111 615
527 046 104 004 106 047 125 415 723 344
241 264 773 111 337 446 514 600 677 7 </Data>
</RIGOL_VSA_KNOWN_DATA_FILE>
Window Layout
1. Single Window
The user interface displays the waveform of the currently selected trace in one
single window.
2. LR Window
The user interface displays the trace waveform or data in two windows.
 If trace 1 or trace 2 is selected before setting the window layout, the left
window displays trace 1 and the right window displays trace 2.
 If trace 3 or trace 4 is selected before setting the window layout, the left
window displays trace 3 and the right window displays trace 4.
3. UD Window
The user interface displays the trace waveform or data in two windows.
 If trace 1 or trace 2 is selected before setting the window layout, the upper
window displays trace 1 and the bottom window displays trace 2.
 If trace 3 or trace 4 is selected before setting the window layout, the upper
window displays trace 3 and the bottom window displays trace 4.
4. LRD Window
The user interface displays the trace waveform or data in three windows.

Rigol RSA3000E Series Specifications

General

Brand	Rigol
Model	RSA3000E Series
Category	Measuring Instruments
Language	English