Rigol RSA3000E Series - Page 57

Chapter 1 Quick Start RIGOL
RSA3000E User Guide 1-41
software Ultra Sigma. Then install it according to the installation
wizard.
 Use the USB cable to connect the rear-panel USB DEVICE interface of
RSA to the USB HOST interface of the PC.
 Run Ultra Sigma. Search the resource and right-click the resource
name. In the displayed menu, select "SCPI Panel Control". Input the
following option installation command in the displayed SCPI control
panel: :SYSTem:LKEY <option info>@<license info>
. Wherein,
<option info>
indicates the option order No., and <license info>
indicates the option license code.
For example, the following command is used to install the option
RSA3000E-PA.
:SYSTem:LKEY
RSA3000E-PA@8AD12B8EBC5DF492D1D4289B7CBA5B6150BF6F5D75
2D645C36D74530B05F39B49C461B23A50D6C94A34E06782AC438007
0B0D1A86BA84E02768391FFD70C2103