Rion VM-83 - Connecting the Accelerometer

5
Controls and Features
Rear Panel
Battery holder
Four IEC R14 (size C) batteries are inserted here.
Battery holder button
Push this button to lock or unlock the battery holder.
AC output connector
An AC signal corresponding to the measurement value is available at this
connector (full-scale point: 2 V, output impedance approx. 600 ohms).
DC output connector
A DC signal corresponding to the measurement value is available at this
connector (full-scale point: 2 V, output impedance approx. 600 ohms).
External power supply connector
The AC adapter (option) can be connected here.