Rion VM-83 - Accessories

81
Specifications
Input Section
(1) ACCELEROMETER input
For piezoelectric accelerometer (microdot
connector)
Maximum input charge 30000 pC
(2) PREAMP 1 input For piezoelectric accelerometer via preamplifier
VP-26A (7-pin female connector PRC-03)
(3) PREAMP 2 input For piezoelectric accelerometer with integrated
preamplifier
18 V, 2 mA drive (microdot connector)
(4) SERVO input For servo accelerometer LS-10C or LS-20C
(8-pin female connector)
Measurement modes
(1) Acceleration (ACC) m / s
2
(piezoelectric accelerometer), mm / s
2
(servo
accelerometer)
(2) Velocity (VEL) mm / s
(3) Displacement (DISP) mm
Measurement range
Piezoelectric accelerometer
- Accelerometer sensitivity 0.030 to 0.999 pC / (m / s
2
)
Acceleration 3, 10, 30, 100, 300, 1000, 3000, 10000 m / s
2
Velocity 30, 100, 300, 1000, 3000, 10000 mm / s
Displacement 10, 30, 100, 300, 1000, 3000, 10000 mm
(HPF 1 Hz)
Displacement 3, 10, 30, 100, 300, 1000, 3000, 10000 mm
(HPF 3 Hz)
Displacement 0.3, 1, 3, 10, 30, 100, 300, 1000 mm
(HPF 10 Hz or higher)