Rion VM-83 User Manual

83
Specifications
Filters
Piezoelectric accelerometer
HPF OFF, 1, 3, 10, 20, 50 Hz (-10% point), selectable
LPF OFF, 100, 300, 1 k, 3 k, 10 kHz (-10% point), selectable
Servo accelerometer
HPF 0.1, 0.3, 1 Hz, selectable
LPF 50, 100 Hz, selectable
Display (detection) characteristics
Effective value (RMS) True rms
Equivalent peak (EQ PEAK) rms ×
2
Equivalent peak-to-peak (EQ P-P) rms ×2
Maximum value hold
Maximum display value for selected measurement mode and display
characteristics is held (numeric display only). Reset key allows reset at any
time.
Peak value hold
Peak value of acceleration waveform is held.
Comparator function
Level evaluation based comparator. Output activated when comparator level
is exceeded
- Comparator level setting: in 2% steps of full-scale value
- Delay time 0 to 9 s in 1-s steps
- Auto reset time 0 to 90 s in 1-s steps, ON/OFF
- Comparator output
open-collector output
max. applied voltage: 24 V,
max. drive current: 50 mA (when the impressed voltage is 24 V)
25 mA (when the impressed voltage is 12 V)
10 mA (when the impressed voltage is 5 V)
buzzer output ON/OFF; LCD flashing

Rion VM-83 Specifications

General

Brand	Rion
Model	VM-83
Category	Measuring Instruments
Language	English