RKI Instruments GD-70D Series - Page 61

- 61 - GD-70D
1-9. M MODE
Switch to the regular
maintenance mode.
○
○
○
1- 9
M MODE
MAINTENANCE
→
SET
See Maintenance
Mode on page 65.
▲
↓↑
▼
To 1-1. ZERO
NOTE
• Communication output setting 1-8 (COM SET) is displayed only for EA specification.
• In EA specification, if only analog transmission is used (Ethernet is not used), if the communication
output setting is set to A, Communication Abnormalities E-6 does not occur even if an Ethernet cable
is not connected.