Roberts R100 - Page 11

Confi guration
8
Setup wizard
Run wizard again
at next start up?
Plugging in and language selection - cont.
7. Your radio will ask whether the Setup Wizard should be run at the next start
up. Although the 'YES' option is highlighted if you wish to change the language
you will need to select the 'NO' option. Press the Tuning Up or Down buttons
to highlight the 'NO' option. Press the Select button.
8. Your radio will then display the Main menu. Press the Tuning Up or Down
buttons until ‘System settings’ is highlighted on the screen.
Press the Select button to enter the System Settings menu.
9. Press the Tuning Up or Down buttons until ‘Language’ is highlighted on the
screen.
Press the Select button to enter the Language menu.
10. Press the Tuning Up or Down buttons until the desired language is highlighted
on the screen.
Press the Select button to select the chosen language option.
The display will then change to show the System Settings menu in the chosen
language.
11. Press the Tuning Up or Down buttons until the ‘Setup wizard’ option is
highlighted on the screen and then press the Select button.
If you change the language you will not see 'Setup wizard' in English. You
will see an equivalent menu item in your language - for example, 'Assistant
réglages' in French, or 'Inställningsguide' in Swedish.
12. Press the Tuning Up or Down buttons until ‘YES’ is highlighted on the screen
and press the Select button to select it.
This will cause the radio to run the set up procedure as if it had just been
switched on for the fi rst time, but it will do this using the language selected in
step 10, above.
13. Continue setting up your radio on the next page.
FM
Bluetooth
AUX in
Sleep
Alarms
System settings
Main menu
Equaliser
Network
Time/Date
Brightness
Language
Factory Reset
System settings
English
Français
Deutsch
Italiano
Dansk
Nederlands
Language
*
Brightness
Language
Factory Reset
Software update
Setup wizard
Info
System settings
Setup wizard
Start now?
7-12
7-12
Select
i /
7-12