Roberts R100 - FM Radio Operations; Operating FM Radio Mode

42
DAB Radio
Dynamic Range Control settings
Dynamic Range Control (also known as DRC) can make quieter sounds
easier to hear when your radio is used in a noisy environment by reducing
the dynamic range of the audio signal.
1. Press the On/Standby button to switch on your radio.
2. Press and hold the Mode button and then select the DAB radio mode
(see page 6).
3. Press the Menu button to enter the DAB menu.
4. Press the Tuning Up or Down buttons until 'DRC' is highlighted on
the display.
5. Press the Select button to enter the DRC adjustment mode. The
current DRC setting will be indicated with an asterisk.
6. Press the Tuning Up or Down buttons to highlight the required DRC
setting (the default is Off).
'DRC Off' - DRC is switched off, Broadcast DRC will be ignored.
'DRC high' - DRC is set as sent by broadcaster.
'DRC low' - DRC level is set to 1/2 that sent by broadcaster.
7. Press the Select button to confi rm the setting.
Note: Not all DAB broadcasts use the DRC function. If the broadcast
does not provide DRC information, then the DRC setting in the radio will
have no effect.
Station list
Scan
Manual tune
Prune invalid
DRC
Station order
DAB
DRC high
DRC low
DRC off
DRC
DAB radio
h
tt
p:/
/
Bluetooth
Internet
Radio
My Music DAB Radio
FM Radio AUX
2,3
4,6
4,6
Select
i /
5,7