Roberts R100 - Leave a Group

94
Leave a group
Your R100 radio can be removed from a current group.
1. Access the menu for the current mode, press the Menu button.
2. Press the Tuning Up or Down buttons until 'System settings' is highlighted
on the display.
3. Press and release the Select button to enter the settings menu.
4. Press the Tuning Up or Down buttons until 'Multi-room' is highlighted on
the display. Press and release the Select button.
5. Press the Tuning Up or Down buttons until 'Leave group' is highlighted
on the display. Press and release the Select button.
6. Your R100 will be removed from the current group.
If your R100 was previously sending audio to other products in the group
that will cease. The other products will remain in the group and must then
be 'operated' separately.
FM
Bluetooth
AUX in
Sleep
Alarms
System settings
Main menu
Language
Factory reset
Software update
Setup wizard
Info
Multi-room
System settings
View details
Create new group
Add to group
List current clients
Leave group
Dissolve group
Multi-room
1
2-5
2-5
Select
i /
2-5
Left
Group
Multi-room & UNDOK