96
Stereo mode switch
You can confi gure your R100 as a stand alone stereo radio or as a left
or right speaker in a stereo setup when you have two radio's within the
same multi-room group.
Typically the R100 would be used in this way with the R1 speaker.
Create a stereo sound with your R100
1. To listen with stereo sound from a single R100 radio, set the Stereo
mode switch to the centre 'Auto' position.
Create a stereo pair of speakers within a
multi-room group
If you have two similar products in the same room and they are both
connected to the network and within the same multi-room group you may
combine the two radios into a stereo pair.
1. Set the Stereo mode switch on one of the radios to the left and the
other one to the right.
2. The speakers will then operate as a stereo pair.
1
Left Right
Stereo pair of speakers
Multi-room & UNDOK
To Next Page
