Roberts R100 - Manual FM Tuning

43
Station order setup
Your radio has 3 station order settings from which you can choose. The
station order settings are, alphanumeric, ensemble and valid.
Note: The default station order on your radio is alphanumeric.
1. Press the On/Standby button to switch on your radio.
2. Press and hold the Mode button and then select the DAB radio mode
(see page 6).
3. Press the Menu button to enter the DAB menu list.
4. Press the Tuning Up or Down buttons until 'Station order' is highlighted.
Press the Select button to enter the station order adjustment mode.
5. Press the Tuning Up or Down buttons to choose between
'Alphanumeric', 'Ensemble' and 'Valid'.
'Alphanumeric' - sorts the station list alpha-numerically 0...9 A...Z.
'Ensemble' - organises the station list by DAB multiplex.
'Valid' - shows only those stations for which a signal can be found.
The current setting is indicated by an asterisk.
6. Press the Select button to select the required station order.
7. Press the Menu button as needed to return to the DAB menu or to
the stations list.
Station list
Scan
Manual tune
Prune invalid
DRC
Station order
DAB
Alphanumeric
Ensemble
Valid
Station order
DAB radio
h
tt
p:/
/
Bluetooth
Internet
Radio
My Music DAB Radio
FM Radio AUX
2,3
4,5
4,5
Select
i /
4,6