Roberts R100 - View the Radios Multi-Room Details

Using your radio's controls to confi gure multi-room
In addition to using the UNDOK app you may also use your radio's controls to
confi gure it as part of a group of multi-room products.
View the radio's multi-room details
To view the multi-room details for your R100 follow the below procedure.
1. Access the menu for the current mode by pressing the Menu button.
2. Press the Tuning Up or Down buttons until 'System settings' is highlighted
on the display.
3. Press and release the Select button to enter the settings menu.
4. Press the Tuning Up or Down buttons until 'Multi-room' is highlighted on
the display. Press and release the Select button.
5. Press the Tuning Up or Down buttons until 'View details' is highlighted on
the display. Press and release the Select button. Your radio's multi-room
details will be shown on the display.
• Ungrouped - The radio is not part of a group.
• Server - The radio sends audio content to other group members.
• Client - The radio receives audio from another product in the group.
6. Press the Back or Menu button to exit the menu.
FM
Bluetooth
AUX in
Sleep
Alarms
System settings
Main menu
Language
Factory reset
Software update
Setup wizard
Info
Multi-room
System settings
View details
Create new group
Add to group
List current clients
Leave group
Dissolve group
Multi-room
1,6
2-5
2-5
Select
i /
2-5
State: Server
Group: Lounge
View details
90
Multi-room & UNDOK