92
Add products to the current group
You can add other connected multi-room products to the current group
using your R100 radio.
1. Access the menu for the current mode, press the Menu button.
2. Press the Tuning Up or Down buttons until 'System settings' is
highlighted on the display.
3. Press and release the Select button to enter the settings menu.
4. Press the Tuning Up or Down buttons until 'Multi-room' is highlighted
on the display. Press and release the Select button.
5. Press the Tuning Up or Down buttons until 'Add to group' is highlighted
on the display. Press and release the Select button.
6. If you wish to add a product from the list to the current group, highlight
the product using the Tuning Up or Down buttons and press the Select
button to confi rm. The screen will show 'Added'. Products already
added to the group are marked with an asterisk. If the adding process
displays 'Failed' it is usually because the R100 is not yet controlling
a group (see Creating new multi-room group page 91).
7. If you do not wish to add another product to the current group press
the Back or Menu buttons to exit.
FM
Bluetooth
AUX in
Sleep
Alarms
System settings
Main menu
Language
Factory reset
Software update
Setup wizard
Info
Multi-room
System settings
View details
Create new group
Add to group
List current clients
Leave group
Dissolve group
Multi-room
1,7
2-6
2-6
Select
i /
2-6
Add to group
S1 002261e80894
S2 002261e80895
Added
Multi-room & UNDOK
To Next Page
Loading...
