49
Stereo / Mono switching
If the FM radio station being listened to has a weak signal, some hiss may
be audible. It is possible to reduce this hiss by forcing the radio to play the
station in mono rather than stereo.
1. Select the FM radio mode (see page 6) and tune to the required FM
station as previously described.
2. Press the Menu button to enter the FM menu.
3. Press the Tuning Up or Down buttons until 'Audio setting' is highlighted
on the display. Press the Select button to enter the audio setting mode.
The current setting is indicated with an asterisk.
4. To switch to mono in order to reduce the hiss from a weak FM signal
press the Tuning Up or Down buttons until 'YES' is highlighted. Press
the Select button to confi rm the setting.
Alternatively, to return to the normal automatic 'stereo or mono' mode
press the Tuning Up or Down buttons until 'NO' is highlighted. Press
the Select button to confi rm the setting.
5. Press the Menu button to return to the normal FM mode display.
Scan setting
Audio setting
System settings
Main menu
FM
FM weak reception
Listen in Mono only?
FM weak reception
Listen in Mono only?
YES NO
FM radio
h
ttp://
Bluetooth
Internet
Radio
My Music DAB Radio
FM Radio AUX
2,5
3,4
3,4
Select
i /
3,4
To Next Page
Loading...
