Publication IASIMP-QS003B-EN-P - October 2009 111
Create a Project in RSLogix 5000 Programming Software Chapter 9
8. Right-click the
xxxx_Light tag name and
select New ‘xxxx_Light’.
The xxxx_Light is an
alias tag for the I/O point
tag name. This lets you
assign a simple name to a
physical I/O point
address.
9. In the Type field, select
Alias.
10. In the Alias For field,
browse to a local 1769
Compact digital output
module and select a bit.
This example uses
Local:2:O.Data.0.
11. Click OK.
To Next Page
Loading...
