Rockwell Automation 1768-L43 - Page 140

140 Publication IASIMP-QS003B-EN-P - October 2009
Chapter 11 Create a PowerFlex 70 Application
7. In the New Module
dialog box:
a. Enter a unique Name
for the drive.
b. Enter the IP address
for the PowerFlex 70
that you recorded in
Appendix
A.
c. Click Change.
8. On the Full or Partial
Match dialog box, make
sure the Include I/O box
is unchecked and click
Partial.
9. Click OK.
The PowerFlex 70 is
added to the controller
organizer under the
network port.
10. Click Save.
The PowerFlex 70 is
added to 1768-ENBT
Ethernet under I/O
Configuration.