Publication IASIMP-QS003B-EN-P - October 2009 157
Create a PowerFlex 70 Application Chapter 11
5. Expand the output
polling tag that
corresponds to your
DeviceNet scanner.
6. Change the O.Reference
tag value to 15000
engineering units, which
is approximately 59.5 Hz.
This is the speed your
drive will accelerate to
and is determined by
using this equation.
7. If the PowerFlex 70 drive
is faulted, set the
O.ClearFault tag to 1 and
then back to 0.
EU
Hz
---------
32767
130
--------------=
To Next Page
Loading...
