Rockwell Automation 1768-L43 - Page 98

98 Publication IASIMP-QS003B-EN-P - October 2009
Chapter 8 Configure the DeviceNet Network
6. Click OK.
RSNetWorx begins
browsing the network.
When all of the devices
on your DeviceNet
network have appeared
on the screen, click
Cancel.
If your PowerFlex drive
does not display, see
Uploading an EDS File
From a Drive,
Knowledgebase ID
20539.
7. Right-click the
1769-SDN and select
Properties.
8. Select the Module tab.
9. Click Download.
This clears the
configuration from the
1769-SDN module,
synching the software
with the device.