76 Rockwell Automation Publication 1794-UM061B-EN-P - March 2020
Chapter 6 Configure Your Adapter and Digital Modules on a ControlNet Network
18. Specify a value for Media Redundancy on channel A, B or A and B.
19. Click OK to see the Save As dialog.
20. Click Save to see the Save As dialog.
21. From the Save As dialog, enter a name and location for the file, and click
Save.
You see the Save Configuration dialog.
22. Click OK.
23. Minimize the RSNetworx for Controlnet window, and open your
RSLogix 5000 window.
24. Notice the I/O OK is solid green in your RSLogix 5000 project.
To Next Page
Loading...
