Rockwell Automation Publication ICSTT-RM406J-EN-P - February 2021 27
Chapter 3 Upgrading Controller Firmware
• EtherNet/IP Driver
Select OK then select Browse Local Subnet.
6. Select OK, then Close when finished.
7. Close the RSLinx Classic Lite software.
Use ControlFLASH to upgrade firmware
Use ControlFLASH to simultaneously upgrade the firmware of up to three
processor modules that are installed in the same processor base unit.
To view devices on a different subnet or VLAN from the workstation running
RSLinx software, select Browse Remote Subnet.