Rockwell Automation Publication ICSTT-RM406J-EN-P - February 2021 5
Download Firmware, AOP,
EDS, and Other Files
Download firmware, associated files (such as AOP, EDS, and DTM), and access
product release notes from the Product Compatibility and Download Center at
rok.auto/pcdc
.
Summary of Changes This publication contains the following new or updated information. This list
includes substantive updates only and is not intended to reflect all changes.
Global changes
This table identifies changes that apply to all information about a subject in the
manual and the reason for the change. For example, the addition of new
supported hardware, a software design change, or additional reference
material would result in changes to all of the topics that deal with that subject.
New or enhanced features
This table contains a list of topics changed in this version, the reason for the
change, and a link to the topic that contains the changed information.
Subject Reason
Changed
workstation
to
computer
Technical improvement
Changed
LED
to status
indicator
Technical improvement
Added AADvance®-Trusted® SIS Workstation
software information where applicable
Enhancement
Changed
Workbench
to
software
where applicable Technical improvement
Applied latest publication template Marketing product change
Topic Page Reason
Rockwell Automation Support
3 Added section.
AAdvance Release 4 Updated AADvance system release information.
Return a Module
12 Updated procedure.
View Module Firmware Versions
23
Added steps for AADvance Workbench software
version 2.x and AADvance-Trusted SIS
Workstation software.
Upgrade the processor module firmware
25 Updated procedures.
Latching and Non-Latching Faults
33
Added information for AADvance Workbench
software version 2.x and AADvance-Trusted SIS
Workstation software.
I/O Module Channel Degradation and
Shutdown
38 Updated information.
Fault Finding Process - System Level
41 Changed
Workbench variable
to
status variable
.
Rectify a Critical Processor Firmware/Hardware
Failure
42 Updated information.
Troubleshooting Remote Fault Reset/Join
49 Updated information.
Set the Real Time Clock Manually
49 Removed Rack from list headings.
Understanding the State Variable
(<variablename>.STA)
51
Changed
<tagname>.STA
to
<variablename>.STA
.
Correlation of Status Indicators with State Variable
for a Digital Output
54 Updated Knowledgebase Document ID.
Examine the State Variable
63
Changed
tagname
to
name
.
Added steps for AADvance Workbench software
version 2.x and AADvance-Trusted SIS
Workstation software.
Software
78
Added AADvance-Trusted SIS Workstation
software AADvance license.
Glossary
83 Updated several entries.
To Next Page
Loading...
Need help?
General
