Rockwell Automation Publication ICSTT-RM406J-EN-P - February 2021 81
Appendix A
History of Changes
This appendix contains the new or updated information for each revision of
this publication. These lists include substantive updates only and are not
intended to reflect all changes. Translated versions are not always available for
each revision.
ICSTT-RM406J-EN-P, February 2021
Change
Updated for AADvance system release 1.40 TÜV Rheinland certification
Technical improvements.
Added AADvance-Trusted SIS Workstation software information where applicable
Updated publication template.
Return a Module: Updated procedure.
View Module Firmware Versions: Added steps for AADvance Workbench software
version 2.x and AADvance-Trusted SIS Workstation software.
Upgrade the processor module firmware: Updated procedures.
Latching and Non-Latching Faults: Added information for AADvance Workbench
software version 2.x and AADvance-Trusted SIS Workstation software.
I/O Module Channel Degradation and Shutdown: Updated information.
Fault Finding Process - System Level: Changed
Workbench variable
to
status
variable
.
Rectify a Critical Processor Firmware/Hardware Failure: Updated information.
Trouble shooting Remote Fault Reset/Join: Updated information.
Set the Real Time Clock Manually: Removed Rack from list headings.
Understanding the State Variable (<variablename>.STA): Changed
<tagname>.STA
to
<variablename>.STA
.
Correlation of Status Indicators with State Variable for a Digital Output: Updated
Knowledgebase Document ID.
Examine the State Variable: Changed
tagname
to
name
. Added steps for AADvance
Workbench software version 2.x and AADvance-Trusted SIS Workstation software.
Software: Added AADvance-Trusted SIS Workstation software AADvance® license.
Glossary: Updated several entries.
Software: Added AADvance-Trusted SIS Workstation software AADvance® license.
Glossary: Updated several entries.
ICSTT-RM406I-EN-P, July 2019
Change
Updated for Release 1.34 IEC 61508 Edition 2.0 certification
Updated Preface release number to 1.34
Legal requirements
Updated trademarks
Removed print location