Rockwell Automation Publication 2715P-UM001C-EN-P - March 2019 41
Install the PanelView 5510 Terminal Chapter 2
4. Tap the Ethernet icon.
5. Configure the Ethernet ports for the terminal.
See Configure the Ethernet Ports on page 51
.
6. Update the firmware by using the ControlFLASH™ software.
Begin the update at Get the Terminal Firmware on page 86
.
You can now download a View Designer application to the terminal. After the
application is downloaded, the terminal resets then automatically launches the
application.
To Next Page
Loading...
