60 Rockwell Automation Publication 2715P-UM001C-EN-P - March 2019
Chapter 3 Configure Terminal Settings
Disable Downloads to the
Terminal
As a security measure, you can disable downloads to the terminal, including
application downloads and firmware updates. Disable downloads to prevent the
current application from being replaced when an application is downloaded from
the View Designer application.
To disable downloads to the terminal, follow these steps.
1. Press the navigation button on the terminal.
2. On the Settings screen, tap HMI Device.
3. Tap the Allow Downloads and Firmware Updates check box to clear the
check box.
• Downloads are not permitted when the check box is cleared.
• Downloads are permitted when the check box is checked.
4. To close the window, tap X.
While this setting is unchecked, you cannot download another application to the
terminal or update the terminal firmware.
Attempts to download an application from the View Designer application results
in an error.
To Next Page
Loading...
Need help?
General
