Rockwell Automation Publication 2715P-UM001C-EN-P - March 2019 89
Update Firmware Chapter 6
Update the Firmware by
Using ControlFLASH
Software
To use the ControlFLASH software to update the firmware in a PanelView 5510
terminal, follow these steps.
1. Click Start>Programs>FLASH Programming Tools>ControlFLASH.
2. Make sure that you know the required information in the Welcome dialog
box, then click Next.
3. Select the catalog number of the PanelView 5510 terminal that you want
to update and click Next.
To Next Page
Loading...
