Rockwell Automation Allen-Bradley PanelView 5510 Series

Rockwell Automation Publication 2715P-UM001C-EN-P - March 2019 79
Chapter 5
Install and Replace Components
Accessories and
Replacement Parts
You can view a list of accessories and replacement parts in Ta b le 4 through
Tab l e 8
in Chapter 1.
Review the specifications of a new component before you install it to verify that
it is compatible with the terminal. Record the model, serial number, and any
other pertinent information of new components for future reference.
Voltage Precautions
The terminals contain line voltages. Disconnect all power to the terminal before
you install or remove components.
Topic Page
Connect to USB Ports 80
Insert an SD Card 81
Replace the Battery 82
Install a Protective Overlay 84
IMPORTANT We recommend that you use only Allen-Bradley® approved accessories and
replacement parts.
SHOCK HAZARD: Disconnect all power to the terminal before you remove
components.
Failure to disconnect power can result in severe electrical shock to an individual or
damage to the terminal.