FSE HCOPy Subsystem
1065.6016.12 6.121 E-16
:HCOPy:DEVice:COLor ON | OFF
This command selects between color and monochrome hardcopy of the screen.
Example: ":HCOP:DEV:COL ON"
Features: *RST value: OFF
SCPI: conforming
Modes: A, VA, BTS, MS
:HCOPy:DEVice:LANGuage<1|2> WMF| EWMF | GDI | BMP (FSE with NT controller)
:HCOPy:DEVice:LANGuage<1|2> HPGL | PCL4 | PCL5 | POSTscript | ESCP | WMF| PCX | HP7470 |
EPSON24| EPSON24C | PCL4_C | PCL4_C3 | LASERJ | DESKJ |
DESKJ_C | DESKJ_C3 | HPGL_LS | HP7470LS
This command determines the data format of the printout.
Example: ":HCOP:DEV:LANG WMF"
Features: *RST value: -
SCPI: conforming
Modes: A, VA, BTS, MS
HPGL data format for printout on a plotter in HPGL,
HP7470 special format for printout on a plotter hp7470 (reduced HPGL format)
HPGL_LS and special HPGL/HP7470-format allowing output of the traces with
HP7470LS variable Line
styles
PCL4.and PCL5 generic data formats for laser and ink-jet printers, with
PCL4: Black/white
PCL4_C: Color (3 color cartridges + black cartridge)
PCL4_C3: Color (3 color cartridges only)
PCL5: Black/white with 300DPI resolution, new language version.
LASERJ Data format for HP-laserjet starting with series III
DESKJ... Data formats for printers of HP-deskjet series, with
DESKJ: Black/white
DESKJ_C: Color (3 color cartridges + black cartridge, e. g. Deskjet 560)
DESKJ_C3: Color (3 color cartridges only, e. g. Deskjet 500)
POSTscript a printer language,
ESCP data format for a 24-pin printer.
EPSON24 data format for Epson-compatible 24-needle printers, black/white, e. g.
Epson LQ-series, R&S PDN
EPSON24C data format for Epson-compatible 24-needle color printers, e. g.
Epson Stylus Color, R&S PDN Color
WMF (WINDOWS Metafile Format), PCX (pixel graphics) and EWMF(Enhanced Metafile Format)
data formats for output files which can at a later time be directly integrated in
corresponding programs for documentation purposes.
BMP (Bitmap) Data format for output files (FSE with NT controller only).
GDI (Graphics Device Interface) Default format for the output to a printer configured
under Windows. For the output file the printer driver configured under Windows is
used and thus a printer-specific format is generated (FSE with NT controller only).
To Next Page
Loading...
