FSE SENSe Subsystem
1065.6016.12 6.183 E-16
:[SENSe<1|2>:]DDEMod:FORMat QPSK | PSK | MSK | QAM | FSK
This command selects the digital demodulation type.
Example: ":DDEM:FORM QPSK"
Features: *RST value: MSK
SCPI: device-specific
Mode: VA-D
:[SENSe<1|2>:]DDEMod:SBANd NORMal | INVerse
This command selects the sideband for the demodulation.
Example: ":DDEM:SBAN INV"
Features: *RST value: NORMal
SCPI: device-specific
Mode: VA-D
:[SENSe<1|2>:]DDEMod:QPSK:FORMat NORMal | DIFFerential | OFFSet | DPI4
This command determines the specific demodulation type for QPSK.
Example: ":DDEM:QPSK:FORM DPI4"
Features: *RST value: -
SCPI: device-specific
Mode: VA-D
:[SENSe<1|2>:]DDEMod:PSK:NSTate 2 | 8
This command determines the specific demodulation type for PSK.
Example: ":DDEM:PSK:NST 2"
Features: *RST value: -
SCPI: device-specific
Mode: VA-D
Value 2 (i.e. PSK2) corresponds to BPSK demodulation, value 8 the 8PSK demodulation.
:[SENSe<1|2>:]DDEMod:PSK:FORMat NORMal | DIFFerential | N3Pi8
This command determines the specific demodulation type for PSK.
Example: ":DDEM:PSK:FORM DIFF"
Features: *RST value: -
SCPI: device-specific
Mode: VA-D
To Next Page
Loading...
