SENSe Subsystem FSE
1065.6016.12 6.186 E-16
:[SENSe<1|2>:]DDEMod:NORMalize ON | OFF
This command switches normalizing of the unit circle on or off using IQ offset.
Example: ":DDEM:NORM OFF"
Features: *RST value: ON
SCPI: device-specific
Mode: VA-D
:[SENSe<1|2>:]DDEMod:SEARch:PULSe:STATe ON | OFF
This command switches the signal burst search on or off.
Example: ":DDEM:SEAR:PULS:STAT OFF"
Features: *RST value: ON
SCPI: device-specific
Mode: VA-D
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:CATalog?
This command polls the names of all sync-file data sets stored on the harddisk. Syntax of output
format:
<Sum of file lengths of all subsequent files>,<free memory on hard disk>,
<1st file name>,,<1st file length>,<2nd file name>,,<2nd file length>,....,<nth file name>,
Example: ":DDEM:SEAR:SYNC:CAT?"
Feature: *RST value: -
SCPI: device-specific
Mode: VA-D
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:SELect <string>
This command selects a predefined sync file. A file that has been set previously by the command
DDEM:SEARch:SYNC:PATTern becomes invalid.
Example: ":DDEM:SEAR:SYNC:SEL "PATT_1"
Feature: *RST value: ""
SCPI: device-specific
Mode: VA-D
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:OFFSet <numeric_value>
This command defines the offset of the display with reference to the synchronization sequence.
Example: ":DDEM:SEAR:SYNC:OFFS 10SYM"
Features: *RST value: 0 SYM
SCPI: device-specific
Mode: VA-D
To Next Page
Loading...
