Rohde & Schwarz FSEA20 - Page 331

Command Assignment - General Device Settings FSE
1065.6016.12 6.274 E-16
Basic Instrument - General Device Settings
DATA VARIATION Key Group
HOLD
UNLOCK
no corresponding IEC/IEEE-bus command
LOCK DATA
no corresponding IEC/IEEE-bus command
LOCK ALL
no corresponding IEC/IEEE-bus command
STEP
if needed, the step width is entered in the subsystem of the corresponding parameter.
STEPSIZE
AUTO
--
STEPSIZE
MANUAL
--
SYSTEM Key Group
DISPLAY
FULL SCREEN
DISPlay:FORMat SINGle
SPLIT
SCREEN
DISPlay:FORMat SPLit
ACTIVE
SCREEN A
The screen is selected via the numeric suffix of the individual commands.
SCREEN
COUPLING
--
MODE
COUPLED
:INSTrument<1|2>:COUPle MODE
HORIZONTAL
SCALING
::INSTrument<1|2>:COUPle X
VERTICAL
SCALING
::INSTrument<1|2>:COUPle Y
COUPLING
CONTROL
::INSTrument<1|2>:COUPle CONTrol
SCREENS
UNCOUPLED
::INSTrument<1|2>:COUPle NONE | ALL