Rohde & Schwarz FSEA20 - Page 332

FSE Command Assignment - General Device Settings
1065.6016.12 6.275 E-16
CONFIG
DISPLAY
--
SELECT
OBJECT
--
BRIGHTNESS
DISPlay:CMAP:HSL <hue>,<sat>,<lum>
TINT
DISPlay:CMAP<1...13>:HSL <hue>,<sat>,<lum>
SATURATION
DISPlay:CMAP<1...13>:HSL <hue>,<sat>,<lum>
DEFAULT
COLORS
DISPlay:CMAP<1...13>:DEFault
PREDEFINED
COLORS
DISPlay:CMAP<1...13>:PDEFined BLACk | BLUE | BROWn | GREen | CYAN | RED
| MAGenta | YELLow | WHITe | DGRAy | LGRAy | LBLUe | LGREen | LCYan |
LRED | LMAGenta
LOGO
ON/OFF
DISPlay:LOGO ON | OFF
FREQUENCY
ON/OFF
DISPlay:ANNotation:FREQuency ON | OFF
DATA ENTRY
FIELD
--
DATAENTRY
X
no corresponding IEC/IEEE-bus command
DATAENTRY
Y
no corresponding IEC/IEEE-bus command
DEFAULT
POSITION
no corresponding IEC/IEEE-bus command
DATAENTRY
OPAQUE
no corresponding IEC/IEEE-bus command
TIME
ON OFF
:DISPlay[:WINDow<1|2>]:TIME ON | OFF
DISPLAY
COMMENT
:DISPlay[:WINDow<1|2>]:TEXT[:DATA] <string>
:DISPlay[:WINDow<1|2>]:TEXT:STATe ON | OFF
SCR.SAVER
ON OFF
DISPlay:PSAVer[:STATe] ON | OFF
SCR.SAVER
TIME
DISPlay:PSAVer:HOLDoff <num_value>
CAL
CAL
SHORT
CALibration:SHORt?
CAL
TOTAL
CALibration[:ALL]?
CAL
RES BW
CALibration:BANDwidth|BWIDth[:RESolution]?