Rohde & Schwarz FSEA20 - Page 342

FSE Command Assignment - Vector Signal Analysis
1065.6016.12 6.285 E-16
MODACOM
:[SENSe<1|2>:]DDEMod:PRESet MODacom
FLEX16_2
:[SENSe<1|2>:]DDEMod:PRESet F16
FLEX32_2
:[SENSe<1|2>:]DDEMod:PRESet F322
FLEX32_4
:[SENSe<1|2>:]DDEMod:PRESet F324
FLEX64_4
:[SENSe<1|2>:]DDEMod:PRESet F64
DIGITAL
DEMOD
::INSTrument[:SELect] DDEMod
:[SENSe<1|2>:]DDEMod:FORMat QPSK | PSK | MSK |QAM | FSK
:[SENSe<1|2>:]DDEMod:QPSK:FORMat NORMal | DIFFerential | OFFSet | DPI4
:[SENSe<1|2>:]DDEMod:PSK:NSTate 2 | 8
:[SENSe<1|2>:]DDEMod:PSK:FORMat NORMal | DIFFerential | N3Pi8
:[SENSe<1|2>:]DDEMod:MSK:FORMat TYPE1 | TYPE2 | NORMal | DIFFerential
:[SENSe<1|2>:]DDEMod:QAM:NSTate 16
:[SENSe<1|2>:]DDEMod:FSK:NSTate 2 | 4
Quering the results:
:CALCulate<1|2>:MARKer<1|2>:FUNCtion:DDEMod:RESult? MERM| MEPK| MEPS|
PERM| PEPK| PEPS| EVRM| EVPK| EVPS| IQOF| IQIM| ADR| FERR| DEV|
FSRM| FSPK| FSPS| RHO| FEPK
:CALCulate<1|2>:MARKer<1|2>:FUNCtion:Y?
:TRACe:DATA?
MODULATION
PARAMETERS
--
SYMBOL
RATE
:[SENSe<1|2>:]DDEMod:SRATe <num_value>
SIDE BAND
NORM INV
:[SENSe<1|2>:]DDEMod:SBANd NORMal|INVerse
MEAS
FILTER
:[SENSe<1|2>:]DDEMod:FILTer:MEASurement OFF | RCOSine | RRCosine |
GAUSsian | B22 | B25 | B44 | QFM|FM95 | QFR|FR95 | QRM|RM95 | QRR|RR95
| A25Fm | EMES | EREF
REFERENCE
FILTER
:[SENSe<1|2>:]DDEMod:FILTer:REFerence RCOSine | RRCosine | GAUSsian |
B22 | B25 | B44 | QFM|FM95 | QFR|FR95 | QRM|RM95 | QRR|RR95 | A25Fm |
EMES | EREF
ALPHA/BT
:[SENSe<1|2>:]DDEMod:FILTer:ALPHa <num_value>
FSK REF
DEVIATION
:CALCulate<1|2>:FSK:DEViation:REFerence <num_value>
NORMALIZE
ON / OFF
:[SENSe<1|2>:]DDEMod:NORMalize ON | OFF
MEAS RESULT
--
MAGNITUDE
CAP BUFFER
:CALCulate<1|2>:FEED ‘TCAP’
MEAS
SIGNAL
:CALCulate<1|2>:FEED ‘XTIM:DDEM:MEAS’
Quering the results:
:CALCulate<1|2>:MARKer<1|2>:FUNCtion:DDEMod:RESult? MERM| MEPK| MEPS|
PERM| PEPK| PEPS| EVRM| EVPK| EVPS| IQOF| IQIM| ADR| FERR| DEV|
FSRM| FSPK| FSPS| RHO| FEPK
The following commands select the display mode:
MAGNITUDE
:CALCulate<1|2>:FORMat MAGNitude