Rohde & Schwarz FSEA20 - Page 343

Command Assignment - Vector Signal Analysis FSE
1065.6016.12 6.286 E-16
PHASE
:CALCulate<1|2>:FORMat PHASe
FREQUENCY
:CALCulate<1|2>:FORMat FREQuency
REAL/IMAG
PART
:CALCulate<1|2>:FORMat RIMag
EYE DIAG
[FREQ]
:CALCulate<1|2>:FORMat FEYE
EYE DIAG
[I]
:CALCulate<1|2>:FORMat IEYE
EYE DIAG
[Q]
:CALCulate<1|2>:FORMat QEYE
EYE DIAG
TRELLIS
:CALCulate<1|2>:FORMat TEYE
POLAR [IQ]
VECTOR
:CALCulate<1|2>:FORMat COMP
POLAR [IQ]
CONSTELL
:CALCulate<1|2>:FORMat CONS
SYMBOL
DISPLAY
:DISPlay[:WINDow<1|2>]:TRACe<1...4>:SYMBol DOTS | BARS |OFF
PHASE WRAP
ON/OFF
:CALCulate<1|2>:FORMat PHASe | UPHase
EYE
LENGTH
:DISPlay[:WINDow<1|2>]:TRACe<1...4>:EYE:COUNt <num_value>
REFERENCE
SIGNAL
:CALCulate<1|2>:FEED ‘XTIM:DDEM:REF’
Querying the results:
:CALCulate<1|2>:MARKer<1|2>:FUNCtion:DDEMod:RESult? MERM| MEPK| MEPS|
PERM| PEPK| PEPS| EVRM| EVPK| EVPS| IQOF| IQIM| ADR| FERR| DEV|
FSRM| FSPK| FSPS| RHO| FEPK
The following commands select the display mode:
MAGNITUDE
:CALCulate<1|2>:FORMat MAGNitude
PHASE
:CALCulate<1|2>:FORMat PHASe
FREQUENCY
:CALCulate<1|2>:FORMat FREQuency
REAL/IMAG
PART
:CALCulate<1|2>:FORMat RIMag
EYE DIAG
[FREQ]
:CALCulate<1|2>:FORMat FEYE
EYE DIAG
[I]
:CALCulate<1|2>:FORMat IEYE
EYE DIAG
[Q]
:CALCulate<1|2>:FORMat QEYE
EYE DIAG
TRELLIS
:CALCulate<1|2>:FORMat TEYE
POLAR [IQ]
VECTOR
:CALCulate<1|2>:FORMat COMP
POLAR [IQ]
CONSTELL
:CALCulate<1|2>:FORMat CONS