Rohde & Schwarz FSEA20 - Page 357

Command Assignment – GSM BTS Analyzer FSE
1065.6016.12 6.300 E-16
SLOT NO.
AUTOSELECT
CONFigure[:BTS]:CHANnel:SLOT:AUTO ONCE
MIDAMBLE
CONFigure[:BTS]:CHANnel:TSC 0...7
CONFigure[:BTS]:CHANnel:TSC:AUTO ON | OFF
TRIGGER
--
FREE RUN
:TRIGger<1|2>[:SEQuence]:SOURce IMMediate
EXTERN
:TRIGger<1|2>[:SEQuence]:SOURce EXTernal
:TRIGger<1|2>[:SEQuence]:LEVel[:EXTernal] -5.0...+5.0V
SLOPE
POS NEG
:TRIGger<1|2>[:SEQuence]:SLOPe POSitive|NEGative
TRIGGER
ADJUST
--
FRAME
COARSE
:TRIGger<1|2>[:SEQuence]:SYNChronize:ADJust:FRAMe <num_value>
FRAME
FINE
:TRIGger<1|2>[:SEQuence]:SYNChronize:ADJust:FRAMe <num_value>
AUTO FRAME
ADJUST
:TRIGger<1|2>[:SEQuence]:SYNChronize:ADJust:FRAMe:AUTO ONCE
SLOT
ADJUST
:TRIGger<1|2>[:SEQuence]:SYNChronize:ADJust:SLOT <num_value>
AUTO SLOT
ADJUST
:TRIGger<1|2>[:SEQuence]:SYNChronize:ADJust:SLOT:AUTO ONCE
TRIGGER
LEVEL
:TRIGger<1|2>[:SEQuence]:LEVel[:EXTernal] <num_value>
SLOPE
POS NEG
:TRIGger<1|2>[:SEQuence]:SLOPe POSitive|NEGative
DEFAULT
SETTINGS
CONFigure[:BTS]:PRESet
P-GSM 900
CONFigure[:BTS]:NETWork[:TYPE] PGSM | PGSM900
GSM 1800
(DCS 1800)
CONFigure[:BTS]:NETWork[:TYPE] DCS | GSM1800
GSM 1900
(PCS 1900)
CONFigure[:BTS]:NETWork[:TYPE] PCS | GSM1900
R-GSM 900
CONFigure[:BTS]:NETWork[:TYPE] RGSM | RGSM900
GSM 850
CONFigure[:BTS]:NETWork[:TYPE] GSM850
PHASE I
CONFigure[:BTS]:NETWork:PHASe 1
PHASE II
CONFigure[:BTS]:NETWork:PHASe 2
PHASE II+
CONFigure[:BTS]:NETWork:PHASe 2,PLUS
MODULATION
GMSK EDGE
:CONFigure<1|2>[:MS]:MTYPe GMSK | EDGE
with option FSE-K20 only