Rohde & Schwarz FSEA20 - Page 358

FSE Command Assignment – GSM BTS Analyzer
1065.6016.12 6.301 E-16
PHASE/FREQ
ERROR
CONFigure:BURSt:PFERror[:IMMediate]
SINGLE
:INITiate<1|2>:CONTinuous OFF; :INITiate<1|2>[:IMMediate]
:READ:BURSt:PERRor:RMS:STATus?
:READ:BURSt:PERRor:RMS:AVERage?
:READ:BURSt:PERRor:RMS:MAXimum?
:READ:BURSt:PERRor:PEAK:STATus?
:READ:BURSt:PERRor:PEAK:AVERage?
:READ:BURSt:PERRor:PEAK:MAXimum?
:READ:BURSt:FERRor:STATus?
:READ:BURSt:FERRor:AVERage?
:READ:BURSt:FERRor:MAXimum?
CONTINUOUS
:INITiate<1|2>:CONTinuous ON; :INITiate<1|2>[:IMMediate]
:FETCh:BURSt:PERRor:RMS:STATus?
:FETCh:BURSt:PERRor:RMS:AVERage?
:FETCh:BURSt:PERRor:RMS:MAXimum?
:FETCh:BURSt:PERRor:PEAK:STATus?
:FETCh:BURSt:PERRor:PEAK:AVERage?
:FETCh:BURSt:PERRor:PEAK:MAXimum?
:FETCh:BURSt:FERRor:STATus?
:FETCh:BURSt:FERRor:AVERage?
:FETCh:BURSt:FERRor:MAXimum?
NO. OF
BURSTS
--
SET
MANUAL
:CONFigure<1|2>:BURSt:PFERror:COUNt <num_value>
SET TO
STANDARD
--
ARFCN /
FREQUENCY
see submenu SETTINGS
POWER
SETTINGS
see submenu SETTINGS
X UNIT
SYMB TIME
:CALCulate<1|2>:X:UNIT:TIME S|SYM
CONDITIONS
NORM EXTR
:CONFigure<1|2>:BURSt:PFERror:CONDitions NORMal | EXTReme
TRIGGER
see submenu SETTINGS
EDIT
--
PHASE
PEAK
:CONFigure<1|2>[:BTS]:LIMit:PPEak <num_value>
PHASE
RMS
:CONFigure<1|2>[:BTS]:LIMit:PRMS <num_value>
FREQUENCY
:CONFigure<1|2>[:BTS]:LIMit:FREQuency <num_value>
USER LIMIT
ON OFF
:CONFigure<1|2>[:BTS]:LIMit:STANdard ON | OFF
MODULATION
ACCURACY
:CONFigure<1|2>:BURSt:MACCuracy[:IMMediate]
with option FSE-K21 only