Rohde & Schwarz FSEA20 - Page 360

FSE Command Assignment – GSM BTS Analyzer
1065.6016.12 6.303 E-16
FREQUENCY
:CONFigure<1|2>[:BTS]:LIMit:FREQuency <num_value>
USER LIMIT
ON OFF
:CONFigure<1|2>[:BTS]:LIMit:STANdard ON | OFF
CARRIER
POWER
:CONFigure<1|2>:BURSt:POWer[:IMMediate]
:CALCulate<1|2>:LIMit:BURSt:POWer?
MEAS MAX
OUTPUT PWR
:READ:BURSt:POWer?
INC STATIC
PWR CTRL
:READ:BURSt:POWer:STATic?
INC DYNAM
PWR CTRL
:READ:BURSt:POWer:DYNamic?
NO. OF
BURSTS
--
SET
MANUAL
:CONFigure<1|2>:BURSt:POWer:COUNt <num_value>
SET TO
STANDARD
--
SGL MEAS
ON OFF
:CONFigure<1|2>[:BTS]:POWer:SINGle[:STATe] ON | OFF
MEAS SGL
PWR LEVEL
:READ:BURSt:POWer?
STATIC PWR
CTRL LEVEL
:CONFigure<1|2>[:BTS]:POWer:STATic <num_value>
DYNAM PWR
CTRL LEVEL
:CONFigure<1|2>[:BTS]:POWer:DYNamic <num_value>
CLEAR SGL
RESULT TAB
:CONFigure<1|2>[:BTS]:POWer:SINGle:CLEar
SIGNAL
POWER
:CONFigure<1|2>[:BTS]:POWer:EXPected <num_value>
ARFCN /
FREQUENCY
see submenu SETTINGS
POWER
SETTINGS
see submenu SETTINGS
CONDITIONS
NORM EXTR
:CONFigure<1|2>:BURSt:POWer:CONDition NORMal | EXTReme
MEAS
BANDWIDTH
:[SENSe<1|2>:]BANDwidth|BWIDth[:RESolution] DEF | 300kHz | 1MHz
SYNC TO
MIDAMBLE
:TRIGger<1|2>[:SEQuence]:SYNChronize:SOURce FRAMe | TSC
TRIGGER
see submenu SETTINGS
POWER VS
TIME
:CONFigure<1|2>:BURSt:PTEMplate[:IMMediate]
:CALCulate<1|2>:LIMit:BURSt:PTEMplate?
SINGLE
:INITiate<1|2>:CONTinuous OFF; :INITiate<1|2>[:IMMediate]