Rohde & Schwarz FSEA20 - Page 361

Command Assignment – GSM BTS Analyzer FSE
1065.6016.12 6.304 E-16
CONTINUOUS
:INITiate<1|2>:CONTinuous ON; :INITiate<1|2>[:IMMediate]
BURST HIGH
RESOLUTION
:CONFigure<1|2>:BURSt:PTEMplate:SELect TOP
NO. OF
BURSTS
--
SET
MANUAL
:CONFigure<1|2>:BURSt:PTEMplate:COUNt <num_value>
SET TO
STANDARD
--
FULL BURST
:CONFigure<1|2>:BURSt:PTEMplate:SELect FULL
RISING
EDGE
:CONFigure<1|2>:BURSt:PTEMplate:SELect RISing
FALLING
EDGE
:CONFigure<1|2>:BURSt:PTEMplate:SELect FALLing
START
REF MEAS
:READ:BURSt:REFerence[:IMMediate]?
REF MEAS
AUTO USER
:CONFigure<1|2>:BURSt:REFerence:AUTO ON | OFF
ARFCN /
FREQUENCY
see submenu SETTINGS
POWER
SETTINGS
see submenu SETTINGS
X UNIT
SYMB TIME
CALCulate:X:UNIT:TIME S|SYM
MEAS
BANDWIDTH
:[SENSe<1|2>:]BANDwidth|BWIDth[:RESolution] DEF | 300 kHz | 1 MHz
SYNC TO
MIDAMBLE
:TRIGger<1|2>[:SEQuence]:SYNChronize:SOURce FRAMe | TSC
TRIGGER
see submenu SETTINGS
EDIT
--
LIMIT LINE
FILTER
--
NEW LIMIT
LINE
see basic instrument
EDIT LIMIT
LINE
see basic instrument
COPY
LIMIT LINE
see basic instrument
DELETE
LIMIT LINE
see basic instrument
USER LIMIT
ON OFF
:CONFigure<1|2>[:BTS]:LIMit:STANdard ON | OFF
PAGE UP
--