Rohde & Schwarz FSEA20 - Page 77

CALCulate Subsystem FSE
1065.6016.12 6.20 E-16
CALCulate:LIMit Subsystem
The CALCulate:LIMit subsystem comprises the limit lines and the corresponding limit checks. Limit lines
can be defined as upper and lower limit lines. The individual values of the limit lines correspond to the
values of the X-axis (CONTrol) which have to have the same number.
COMMAND PARAMETERS UNIT COMMENT
CALCulate<1|2>
:LIMit<1 to 8>
:ACTive?
:TRACe
:STATe
:UNIT
CATalog?
:CONTrol
[:DATA]
:DOMain
:OFFSet
:MODE
:UNIT
[:TIME]
:SHIFt
:SPACing
:UPPer
[:DATA]
:STATe
:OFFSet
:MARGin
:MODE
:SHIFt
:SPACing
:LOWer
[:DATA]
:STATe
:OFFSet
:MARGin
:MODE
:SHIFt
:SPACing
:FAIL?
:CLEar
[:IMMediate]
<numeric_value>
<Boolean>
DBM | DBPW | DBPT | WATT | DBUV |
DBMV | VOLT | DBUA | AMPere | DB |
DBUV_MHZ | DBMV_MHZ | DBUA_MHZ |
DBUV_M | DBUA_M | DBUV_MMHZ |
DBUA_MMHZ | DEG | RAD | S | HZ | PCT |
UNITLESS
<numeric_value>,<numeric_value>..
FREQuency | TIME
<numeric_value>
RELative | ABSolute
S | SYM
<numeric_value>
LINear | LOGarithmic
<numeric_value>,<numeric_value>..
<Boolean>
<numeric_value>
<numeric_value>
RELative | ABSolute
<numeric_value>
LINear | LOGarithmic
<numeric_value>,<numeric_value>..
<Boolean>
<numeric_value>
<numeric_value>
RELative | ABSolute
<numeric_value>
LINear | LOGarithmic
--
--
HZ | S | SYM
HZ | S | SYM
HZ | S | SYM
DBM | DB | DEG |
RAD | S | HZ | PCT
--
DB | DEG | RAD |
S | HZ | PCT
DB| DEG | RAD |
S | HZ | PCT
--
DB | DEG | RAD|
S | HZ | PCT
DBM | DB | DEG |
RAD | S | HZ | PCT
--
DB| DEG | RAD |
S | HZ | PCT
DB| DEG | RAD |
S | HZ | PCT
--
DB | DEG | RAD |
S | HZ | PCT
--
--
Query only
Query only
Vector Signal Analysis
query only
no query