Using the Markers R&S FSH3
Automatic marker positioning:
Automatic positioning of markers in multimarker mode
is similar to that of the normal marker. The different
functions always apply to the active marker, which is
also indicated for the various functions in the SET
MARKER menu (example: "M2; PEAK").
In addition, it is possible to position all activated
markers (M1 to M6) at the peak of a trace.
¾ In the SET MARKER menu, select ALL MKR TO
PEAK and confirm this with the ENTER key or the
SET MARKER softkey.
The R&S FSH3 sets all activated markers to the
maxima of the trace. The delta markers remain
unaffected by this function.
Displaying all multimarker values:
The R&S FSH3 can display a list of all activated markers and their values.
¾ Press the MKR LIST VIEW softkey.
The R&S FSH3 displays a list of all activated markers
and delta markers.
If you press the MKR LIST VIEW softkey again or any
other softkey in the marker menu, the R&S FSH3
closes the marker table.
Deactivating markers:
In multimarker mode, markers can be deactivated one at a time or all at once.
1145.5973.12 4.26 E-6
To Next Page
Loading...
