Remote Control Commands for Phase Noise Measurements
R&S
®
FSW-K40
78User Manual 1173.9286.02 ─ 15
Example:
INST:LIST?
Result for 3 measurement channels:
'ADEM','Analog Demod','IQ','IQ
Analyzer','IQ','IQ Analyzer2'
Usage: Query only
Table 8-2: Available measurement channel types and default channel names in Signal and Spectrum
Analyzer mode
Application <ChannelType>
Parameter
Default Channel Name*)
Spectrum SANALYZER Spectrum
1xEV-DO BTS (R&S FSW-K84) BDO 1xEV-DO BTS
1xEV-DO MS (R&S FSW-K85) MDO 1xEV-DO MS
3GPP FDD BTS (R&S FSW-K72) BWCD 3G FDD BTS
3GPP FDD UE (R&S FSW-K73) MWCD 3G FDD UE
802.11ad (R&S FSW-K95) WIGIG 802.11ad
Amplifier Measurements (R&S FSW-K18) AMPLifier Amplifier
Analog Demodulation (R&S FSW-K7) ADEM Analog Demod
Avionics (R&S FSW-K15) AVIonics Avionics
cdma2000 BTS (R&S FSW-K82) BC2K CDMA2000 BTS
cdma2000 MS (R&S FSW-K83) MC2K CDMA2000 MS
DOCSIS 3.1 (R&S FSW-K192/193) DOCSis DOCSIS 3.1
GSM (R&S FSW-K10) GSM GSM
I/Q Analyzer IQ IQ Analyzer
LTE (R&S FSW-K10x) LTE LTE
Multi-Carrier Group Delay (R&S FSW-K17) MCGD MC Group Delay
Noise (R&S FSW-K30) NOISE Noise
Phase Noise (R&S FSW-K40) PNOISE Phase Noise
Pulse (R&S FSW-K6) PULSE Pulse
Real-Time Spectrum (R&S FSW-B160R/-
K160RE)
RTIM Real-Time Spectrum
Spurious Measurements (R&S FSW-K50) SPUR Spurious
TD-SCDMA BTS (R&S FSW-K76) BTDS TD-SCDMA BTS
TD-SCDMA UE (R&S FSW-K77) MTDS TD-SCDMA UE
Transient Analysis (R&S FSW-K60) TA Transient Analysis
*) the default channel name is also listed in the table. If the specified name for a new channel already
exists, the default name, extended by a sequential number, is used for the new channel.
Controlling the Phase Noise Measurement Channel
To Next Page
Loading...
