33 / 207 - EN -
1. Introduction
1.1. Preface
Congratulations!
You have chosen a ROHDE pottery wheel, a branded product that meets the highest demands and places great value
on quality. This pottery wheel is technically state-of-the-art and the result of intensive further development and high-
quality production work.
These original operating instructions are intended to make it easier for you to use your pottery wheel. For this reason, all
the important information and guidelines you need have been summarised to enable you to operate your machine
easily and safely.
The basic requirement for safe working is compliance with all safety and handling instructions given in this manual.
1.2. Scope of delivery
No. Item Quantity Remark
1
HMT 600 1
2
Power cable 1
3
Foot pedal with cable 1
4
Stopper for drain hole in splash pan 1
5
3 mm, 5 mm, 8 mm Allen keys 1 of each
6
Drive screws for wooden throwing batt 2 Wooden throwing batt sold separately
7
Operating manual 1
Optional
1
Seat, disassembled into seat, gas pressure spring and
seat base
1 Item no. 550601
2
Tray with struts and mounting materials (disassembled) 1 Item no. 550602
3
Wooden throwing batt 1 Item no. 657052
2. Product description
2.1. General technical characteristics
Property Description Remark
Model
HMT 600
Voltage
1/N/PE AC 230 V
Current
2 A
Frequency
50 Hz
Power
0.37 kW
Connector
Schuko or with EU and UK plug
Rotational speed
0-250 rpm clockwise and anticlockwise Infinitely variable
Speed control
Foot pedal Manual control possible
Machine dimensions (without seat and shelf)
530 mm x 725 mm x 546/674 mm Width x length x height
Equipment dimensions (with seat and shelf)
700 mm x 1229/1335 mm x 766/894 mm Width x length x height
Wheel head dimension
Ø 340 mm Aluminium
Turntable loading weight
Maximum 10 kg
Machine weight
Approx. 39 kg
Seat weight
Approx. 9 kg
Shelf weight
Approx. 6 kg
To Next Page
Loading...
